Inner workings of the speedo meter

Post Reply
Posts: 1914
Joined: Wed Jul 07, 2010 4:28 am
Bikes: 1950Panhead
Location: USA
Been thanked: 212 times

Inner workings of the speedo meter


Post by 1950Panhead » Sat Mar 02, 2013 3:27 am

You do not have the required permissions to view the files attached to this post.

Posts: 6001
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 107 times
Been thanked: 1046 times

Re: Inner workings of the speedo meter


Post by RUBONE » Sat Mar 02, 2013 6:34 am

Many people do not know how "magnetic" speedometers work. In the above picture the dark ring is a magnet. It is driven by the speedo cable and spins. The next shot shows a housing with a suspended metallic cup ( the lighter silver object visible in the notch). When the magnet spins within the cup the resulting magnetic attraction creates drag and the cup moves in the direction of the spinning magnet. There is NO physical connection between the two. The cup has a shaft that extends and the needle is attached to it. As it spins faster the needle points to the appropriate speed. By calibrating the speedo (adding weight to make the needle read correctly for the RPM the magnet is spinning) the instrument is fairly accurate. The numbered wheels are a direct connection to a skew gear and register mileage traveled. Most common failures are caused by lack of lubrication (or dried up lube from time) so often a good cleaning and lube is the cure. However the bezel is crimped on so specialty tools are best used to dismantle. And a calibration machine is needed to get it all working correctly.

Site sponsor
Site sponsor
Posts: 1369
Joined: Fri Sep 21, 2007 3:03 am
Bikes: '52 FL
'64 FLH
Has thanked: 34 times
Been thanked: 117 times

Re: Inner workings of the speedo meter


Post by awander » Sat Mar 02, 2013 6:50 am

What's most interesting to me is that the cup is usually aluminum-usually considered to be a non-magnetic material.

But that is at rest. That is, when the magnet is not spinning(or when the cup and the magnet are spinning at the same speed), there is no attraction between the magnet and the cup.

However, when there is a speed difference between the magnet and the cup, the magnetic field moving through the aluminum actually causes an electrical current to flow in the aluminum, with the result that the cup tries to remain stationary with respect to the magnet-the spring counteracts this force, and the end result is that the faster you spin the magnet, the further the cup is moved against the force of the spring.

Post Reply

Return to “Speedometer, Dashboard & Instruments”