Rivera Pro clutch: any experiences

Post Reply
Posts: 39
Joined: Wed Mar 30, 2005 5:47 am
Location: N.California

Rivera Pro clutch: any experiences


Post by 55FL » Tue Aug 16, 2005 4:19 am

Any experiences with the Rivera Pro clutch in a panhead motorcycle ?


Posts: 170
Joined: Sun Apr 08, 2007 3:49 am
Bikes: 1961 FL
2007 Kaw. Vulcan 2000
Location: Western Mass
Been thanked: 4 times

Re: Rivera Pro clutch


Post by RussW » Tue Aug 16, 2005 5:57 am

I run one in my '61, along with a 1 1/2" Primo belt. Bought the two together as the Brute 11 kit. Works well, easy pull, stays adjusted. Got that "ching ching" sound, mostly I think because the clutch shell is aluminum with the belt drive.

Peter Pan
Posts: 1
Joined: Mon Feb 23, 2009 11:39 pm
Bikes: Harley Davidson EL 1952
Kawasaki Z1300
Location: Netherlands

Re: Rivera Pro clutch


Post by Peter Pan » Mon Sep 19, 2005 12:27 am

I'm running this set up on my 59, Works well but I had to run straight pipes to cover up the racket the thing makes. Talked to Rivera/primo and they told me that's the way it is.

Posts: 867
Joined: Sat Jul 17, 2004 4:06 am
Bikes: '59 Pan FLHF
Has thanked: 5 times
Been thanked: 48 times

Re: Rivera Pro clutch


Post by ozwick86 » Mon Sep 19, 2005 2:05 am

I just broke 4 fingers on my stock basket. I bought a BDL Competitor basket. Uses the stock clutch shell along with my 8mil belt setup.

No noise! very quiet, and very pleased.



Posts: 219
Joined: Sun Dec 16, 2012 8:52 am
Bikes: 94FLSTN
Has thanked: 36 times
Been thanked: 22 times

Re: Rivera Pro clutch: any experiences


Post by bangkokbob » Thu Aug 04, 2016 8:09 am

Hi. Been running a rivera for about 3 years with a BDL. Works well but you should also put in the gold pressure plate to allow the mouse trap to pull the rod back.
Regards B.B.

Post Reply

Return to “Clutch”