dual adjust trans?

Post Reply
bponu
Posts: 32
Joined: Thu Apr 09, 2015 12:01 am
Bikes: 63 pan
Has thanked: 4 times
Been thanked: 2 times

dual adjust trans?

#1

Post by bponu » Sun Apr 19, 2015 11:02 pm

Has anyone ever used a trans dual adjust from J&P? It looks like it will raise the trans up about 3/8 to a 1/2 inch. Will that throw off the belt or chain alignment l?



RUBONE
Moderator
Posts: 5997
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 107 times
Been thanked: 1045 times

Re: dual adjust trans?

#2

Post by RUBONE » Sun Apr 19, 2015 11:21 pm

If assembled correctly the dual adjust kits don't raise the transmission, they are underneath.

bponu
Posts: 32
Joined: Thu Apr 09, 2015 12:01 am
Bikes: 63 pan
Has thanked: 4 times
Been thanked: 2 times

Re: dual adjust trans?

#3

Post by bponu » Mon Apr 20, 2015 1:54 am

yeah I'm a dope, I seen that after I posted it. Thanks and I hope ya'll don't get tired of me I'm new to Harley's.

bponu
Posts: 32
Joined: Thu Apr 09, 2015 12:01 am
Bikes: 63 pan
Has thanked: 4 times
Been thanked: 2 times

Re: dual adjust trans?

#4

Post by bponu » Mon Apr 20, 2015 10:54 pm

Yeah it still won't work it hits the oem adjuster on trans case.

RUBONE
Moderator
Posts: 5997
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 107 times
Been thanked: 1045 times

Re: dual adjust trans?

#5

Post by RUBONE » Tue Apr 21, 2015 12:00 am

What type is it? Some fit on the front, some on the rear. And the adjuster plate (bolted to the tranny plate) needs to be removed on the rear mount type.

bponu
Posts: 32
Joined: Thu Apr 09, 2015 12:01 am
Bikes: 63 pan
Has thanked: 4 times
Been thanked: 2 times

Re: dual adjust trans?

#6

Post by bponu » Tue Apr 21, 2015 12:31 am

This is it http://www.jpcycles.com/product/6200275" onclick="window.open(this.href);return false;

bponu
Posts: 32
Joined: Thu Apr 09, 2015 12:01 am
Bikes: 63 pan
Has thanked: 4 times
Been thanked: 2 times

Re: dual adjust trans?

#7

Post by bponu » Tue Apr 21, 2015 12:35 am

Yeah it goes on the front. I bought it @ a swap meet & when I went to look it up for a link, seen they had instructions on Web site. Just need longer studs.

Post Reply

Return to “Transmission, Starter & Shifting”